工業生產和空氣凈化工程密不可分
- 發布人：
- 發布日期：2017-04-13 17:13:38
隨著社會經濟的快速發展，特別是以微電子、生物工程、精密機加為代表的科學實驗和高科技生產過程，對產品加工的精密化、微型化、高純度、高質量和高可靠性提出了更高的要求。空氣凈化工程 http://www.jnjkjh.com/ 不僅關系到從業人員生產活動中的健康和舒適性，而且關系到生產效率、產品質量，乃至生產過程能否進行的重要問題。
With the rapid development of social economy, especially the scientific experiment and the high technology production process, which is represented by the micro electronics, biological engineering, precision machine, and the product processing precision, miniaturization, Gao Chundu, high quality and high reliability put forward higher requirements. Air purification project is not only related to the health and comfort of the employees in the production activities, but also the important issues related to the production efficiency, product quality, and the production process.
潔凈室+總結得出，空氣凈化工程對生產過程的影響如下：
Clean room + concluded that the impact of air purification engineering on the production process is as follows:
（1）對生產過程產生重要影響
(1) an important impact on the production process
室內生產環境是制約工業生產，特別是高科技生產能否進行的關鍵因素之一。例如，在微電子行業的芯片生產過程中，對微粒的控制要達到分子級，否則生產就無法進行，或者生產出次品；在抗菌素的生產環境中，如果存在某些微生物，生產就不能正常進行。
Indoor production environment is the key factor to restrict the industrial production, especially the high-tech production. For example, in the microelectronics industry of chip production process, the control of particles to achieve molecular level, otherwise production can not be carried out, or the production of defective; in antibiotic production environment, if there is a certain microorganisms, production can not be carried out normally.
（2）影響生產效率
(2) impact on production efficiency
室內生產環境對生產效率的影響體現在以下2方面：首先，良好的生產環境不僅可以保障生產人員的身心健康和出勤率，而且能夠提高他們的工作情緒和積極性；其次，良好的生產環境可以保證生產的順利進行，提高產品的成品率。
The influence of indoor production environment on production efficiency is reflected in the following 2 aspects: first, a good production environment can not only protect the physical and mental health and attendance, but also can improve their working mood and enthusiasm; secondly, a good production environment can ensure the smooth progress of production, improve the finished product rate.
（3）影響產品質量
(3) affect the quality of the product
室內生產環境是影響產品質量的重要因素之一。例如，感光膠片、集成電路、化學試劑、精密儀表和微型電機等產品，如果被粉塵污染，就會降低質量甚至報廢；在食品加工業中，微生物的存在會縮短保質期，降低產品質量。
Indoor production environment is one of the important factors that affect the quality of the products. For example, photographic film, integrated circuit, chemical reagents, precision instruments and micro motor and other products, if the dust pollution, will reduce the quality and even scrapped; in the food processing industry, the existence of microorganisms will shorten the shelf life, reduce product quality.
（4）造成環境污染
(4) cause environmental pollution
眾所周知，環境污染主要是工業污染造成的。其中，大氣污染和水體污染一方面對人們的健康造成影響，另外一方面也會影響生產過程和產品質量。
As is known to all, environmental pollution is mainly caused by industrial pollution. Among them, the air pollution and water pollution on the one hand to people's health, the other hand also affect the production process and product quality.
因此，為了減少室內污染對生產過程的影響，就必須通過空氣凈化工程來改善或解決室內污染問題?？梢钥隙ǎ谄胀ǖ纳a(chǎn)車間想要控制整個微環境的懸浮粒子濃度，使其達到工藝要求的潔凈程度是完全不可能的。只有建造潔凈室，采用密閉的結構，合理的氣流組織及合理的壓差，才能使其微環境內達到所要求的空氣潔凈度，滿足生產要求。
Therefore, in order to reduce the impact of indoor pollution on the production process, it is necessary to improve or solve the problem of indoor pollution by air purification. It is certain that in the ordinary production workshop to control the entire micro environment of the suspended particle concentration, so that it can reach the process requirements of the clean degree is completely impossible. Only the construction of clean room, adopts a closed structure, reasonable airflow organization and reasonable pressure difference, in order to make it microenvironment to achieve the required air cleanliness, meet the production requirements.
